Pond Construction Clay
Consistent, low-permeability clay processed and moisture-conditioned for pond, lake, and reservoir lining. Tested permeability of 1×10⁻⁸ cm/s. Arrives at working moisture — no field conditioning, ready to compact from delivery.
1×10⁻⁸ cm/s Permeability | Moisture Conditioned | Uniform PI Load to LoadMaterial Data Supplied
1×10⁻⁸ cm/s
Tested hydraulic conductivity when compacted
mm per year
Water movement at typical hydraulic head
Working MC
Moisture-conditioned — ready to place
Consistent
Uniform PI and plasticity load to load
Pond Construction Clay
| Property | Specification |
|---|---|
| Hydraulic conductivity | 1×10⁻⁸ cm/s when compacted |
| Water movement through liner | mm per year at typical head |
| Plasticity consistency | Uniform load to load |
| Moisture conditioning | Working range on delivery |
| Material data | Supplied for design sign-off |
- 1×10⁻⁸ cm/s hydraulic conductivity when compacted
- Uniform plasticity load to load — no weak zone interfaces
- Moisture-conditioned — no field preparation required
- Material data supplied for design sign-off
- Suits compacted liner, puddle clay, and geomembrane hybrid approaches
- Farm ponds and stock tanks
- Recreational lakes and fishing ponds
- Irrigation reservoirs
- Decorative water features
- Environmental containment applications
What makes this product perform.
Expand each panel for the technical detail.
-
Our Pond Construction Clay achieves a hydraulic conductivity of 1×10⁻⁸ cm/s when compacted to specification. In practical terms, at that permeability water movement through the liner is measured in millimetres per year under typical hydraulic head conditions. That is the difference between a water body that holds its level and one that requires constant topping up or never fills to design level at all. This is not a theoretical value from optimal laboratory conditions — it is the measured performance of the material when compacted to densities achievable with standard earthworks plant on a typical pond construction site.
1×10⁻⁸ cm/s measured performancemm per year water movementStandard plant achievable
-
Variability in clay mineralogy, moisture, or the presence of granular inclusions creates zones within a liner where permeability differs — and water will find the path of least resistance. Our material is processed to deliver uniform plasticity and composition from load to load, giving the contractor confidence that the liner built on Monday performs the same as the section placed on Friday. That predictability simplifies compaction control, reduces rework risk, and supports consistent lift-by-lift construction. For larger impoundment projects where the liner is subject to engineering review and permeability verification, our documented material properties provide a solid starting point for the design process.
Uniform PI load to load / No weak zone interfaces / Design documentation provided
-
Our clay is suited to the full range of pond lining approaches. For fully engineered compacted clay liners laid in controlled lifts, our documented plasticity and permeability data supports design sign-off and regulatory compliance. For puddle clay applications worked by hand or light plant, the moisture conditioning makes it practical to shape and place without additional preparation. For hybrid approaches combining a clay blanket with a geomembrane overlay, our material provides a stable, consistent base layer with documented permeability beneath the membrane. In each case, the material properties that matter are what our clay is specifically produced to deliver.
Compacted clay liner / Puddle clay / Geomembrane hybrid
– Get a Material Assessment
Share your project details and we will come back to you promptly.
Tell us where the project is, roughly what volumes you are generating, and share any geotechnical data you have. Our team will give you an initial view on suitability — at no cost and with no obligation.
Or call us directly at:
817-343-8797
– Aggregate Products
Other Products
-
C33 Concrete Sand
Free of organic impurities
Meets ASTM C33
Concrete production · Ready mix · Mortar base -
Fine Masonry Sand
• Less than 0.6mm grain
• Meets ASTM C144
Masonry · Mortar mix · Leveling · Landscaping -
#57 Washed Stone
• CA7 / B-Stone / #6 Stone
• Clean, uniform grade
Concrete · Road base · Drainage systems -
Washed #8 Pea Gravel
Natural, no larger than 1/2"
Washed and graded
Drainage · Landscaping · Pipe bedding -
Sedimentary Clay
• Highly impermeable
• Fine grade, consistent
Pond liners · Cement production · Landfill cell construction -
3x5 Construction Entrance Rock Stone
1" to 3" angular quarried stone
SWPPP stabilised entrance compliant
Site access · Tyre scraping · Haul roads · SWPPP BMP
-
Rip Rap Stone
8" to 18" angular quarried stone
Low absorption, durable
Channel banks · Slope protection · Outfall · Culvert aprons
-
Heavy Rip Rap Stone
18"+ angular armourstone
High-velocity hydraulic applications
Bridge abutments · Embankment toes · High-flow channels
– Ready to Work Together
The only facility in DFW that closes the loop.
No broker. No middleman. We take the waste, run the plant, and produce the aggregate — all from one permitted facility in Kennedale.
– Contractors and Buyers
Get your quote.
Build with it.
Local supply, natural material, ASTM-certified. Tell us what you need and we'll have pricing back within two hours.
– Haulers and Disposers
Stop driving past us. Drop it off.
Local supply, natural material, ASTM-certified. Tell us what you need and we'll have pricing back within two hours.
7530 HUDSON CEMETERY RD, KENNEDALE TX 76060 — CONVENIENTLY LOCATED FOR THE ENTIRE DFW SOUTH CORRIDOR. SHORTER HAULS MEAN LOWER FUEL COSTS FOR YOUR FLEET.